One or two inlets: connecting cold and hot water to the washing machine

Connect each inlet to the supply specified in the manual. Having only one tap in the home does not mean that a washing machine with two inlets will work with the other port capped or connected using any kind of branch fitting.

Identify the inlets and requirements

A machine may be designed for cold water, separate cold and hot water inlets, or a special documented supply. The connection markings and manual should confirm what each port is for, along with the temperature and pressure limits.

On some machines, both inlets are used in cycles that users may consider cold or warm. Whirlpool’s documentation for machines with two inlets requires both connections in its specific context; this requirement does not apply to every appliance with two ports.

What can happen if you swap them

The control may receive water different from what it expects, alter the mix, or fail to reach the intended temperature. This can affect both the load and the components and stages of the cycle. If an inlet does not work after connection, the cold or hot water troubleshooting guide can help distinguish an installation issue from a fault.

Preheated water and energy balance

The heat for the wash may come from the appliance or the external supply. Connecting water from a water heater or solar system is appropriate only if the machine is approved for those conditions. It does not guarantee savings: the available temperature, pipe heat loss and energy used outside the machine all matter.

If there is only one tap, check for an approved solution before modifying the pipes or joining the ports. The hose connections must retain their seals, compatibility and accessibility. When calculating consumption, also include external energy if it is used for the wash.

Check that the supply is compatible before choosing adapters; changing the programme settings cannot correct an incorrect water connection.

View all articles in Washing machine installation: requirements and checks