The washing machine needs to meet its model's pressure and flow rate limits while filling with water. A tap that has pressure when closed may deliver an insufficient flow rate when opened.
Three measurements worth distinguishing
- Static pressure: the supply condition when no water is flowing to meet that demand.
- Operating pressure: the pressure available while the appliance and other outlets are using water.
- Flow rate: the quantity of water that can be delivered per unit of time.
An overhead tank provides a supply condition that depends on the difference in height and losses along the route. Knowing the tank's capacity is not enough. A pump should be assessed at its operating point, not just by its rated power.
What information to gather
Find the appliance's limits and describe the water source, timings of outages, simultaneous water use and changes in flow rate. If the installation needs to be measured or modified, a professional should use the appropriate measurement point and method, without improvising tests near electrical connections.
Also check hoses and fittings and water source quality. Dirt or a deformed pipe can restrict flow, but an inadequate new installation needs a water supply solution, not the disabling of the fill detection.
Automatic and manual filling
A semi-automatic washing machine may allow manual filling if it is designed for it. Adding water manually to an automatic machine that is not designed for this does not replace the need to meet its requirements.
Knocking in pipes when water is turned on or off should be assessed as a plumbing problem; it is not the same as drum knocks. If the supply used to work and filling has changed, continue with the inlet diagnosis.
Ask for the water supply to be checked against the exact limits in the manual; there is no tank height or pump power that is suitable for every machine.
View all articles in Washing machine installation: requirements and checks
