The temporary connection must be suitable for both the washing machine and the tap. Not every aerator, pull-out mixer or sink supports a coupling that remains under mains water pressure.
Identify the portable system
It may use a quick connector that combines the inlet and outlet, separate hoses, or a tank that avoids connecting to the tap. The appliance functions and its manual determine the installation; do not copy the setup of a different portable model.
Checks before connecting
- Check the tap type and connection accepted by the adapter and appliance manufacturers.
- Check for restrictions on pull-out spray heads or mixer accessories.
- Check the condition of the seals and the mechanism that holds the coupling in place.
- Make sure the sink is clear and can drain the expected flow without overflowing.
- Stable support and electrical supply that is compatible and kept away from spills.
Install the adapter and secure the outlet with the water turned off, following the documented sequence. The drain hose must not come loose from the force of draining or be left submerged if the installation instructions prohibit this.
During use and when disconnecting
Keep the tap accessible and check the connections externally. If you notice leaks, stop the cycle using the prescribed procedure and turn off the water safely.
To disconnect, follow the manual's instructions for shutting off the water, releasing pressure and removing the coupling. Do not pull on the connector while it is under pressure, or immerse the appliance or cable while collecting residual water. The hoses and seals should be stored without deforming them.
Check that the tap, coupling and drain are compatible before treating the connection as a safe temporary setup.
View all articles in Washing machine installation: requirements and checks
