Washing machine discharge adds water and products to the septic system. The volume and how it is concentrated over time matter, as do the capacity and condition of the installed treatment system.
Discharge must match the intended system
Connecting to a septic system, diverting greywater and discharging it onto the ground are different options. None is permitted simply because the water comes from washing. The person responsible for the installation and the competent authority must confirm the permitted route.
Volume and timing of washing loads
A series of discharges can increase the hydraulic load in a short time. The EPA recommends spreading washing loads throughout the week to avoid concentrating demand on domestic septic systems. The interval and capacity of your system need to be assessed individually; there is no universally safe number of cycles per day.
To describe the demand, record water per cycle, usual loads and other water use that happens at the same time. A machine that uses less water under equivalent conditions can reduce the hydraulic input, but this will not fix a leach field or treatment system that is already failing.
Products and system maintenance
Use compatible products and appropriate doses in accordance with the appliance, product packaging and the treatment system operator’s recommendations. Do not add substances intended to compensate for hydraulic overloading or change connections to conceal an overflow.
If greywater recovery is being considered, it needs a separate assessment. The drain connection must retain its design, and changes in water use must be checked against actual data.
Give the system operator data on volumes and frequency; this is more useful than stating only the washing machine’s capacity.
View all articles in Washing machine installation: requirements and checks
