The temporary connection must be suitable for both the washing machine and the tap. Not every aerator, pull-out mixer or sink can accommodate a coupling that remains under mains pressure.
Identify the portable system
It may use a quick connector that combines the water inlet and drain, separate hoses, or a tank that avoids connecting to the tap. The appliance’s features and its manual determine how to set it up; don’t copy the setup for a different portable washing machine.
Checks before connecting
- Check that the tap type and connection are approved by the adapter and appliance manufacturers.
- Check for restrictions on pull-out spray heads or mixer accessories.
- Check the condition of the seals and the mechanism that secures the coupling.
- Make sure the sink is clear and can drain the expected flow without overflowing.
- Stable support and compatible power supply are essential; keep them away from spills.
With the water turned off, install the adapter and secure the outlet in the documented order. The drain hose must not come loose from the force of the draining water or be submerged if the setup instructions prohibit this.
While using the machine and when disconnecting it
Keep the tap accessible and check the connections from the outside. If you notice a leak, stop the cycle using the prescribed procedure and turn off the water safely.
To disconnect the machine, follow the manual’s instructions for turning off the water, releasing pressure and removing the coupling. Don’t pull on the connector while it’s under pressure or immerse the appliance or cord when collecting residual water. The hoses and seals should be stored without being deformed.
Check that the tap, coupling and drain are compatible before treating the connection as safe for temporary use.
View all articles in Installing a washing machine: requirements and checks
