The power supply must match the washing machine’s rating plate and manual, and comply with local requirements. A plug fitting into a socket does not prove that the voltage, frequency, earthing and protection are suitable.
Document checks before connecting
Check the permitted voltage and frequency, stated power or current, and type of connection. Compare these with the intended supply. A socket that looks identical may be on a circuit that does not meet the required conditions.
Earthing and protection against electrical hazards must be appropriate for the design and local installation. Do not remove the earth contact or increase the rating of a protective device to prevent it from tripping.
What you can check without testing live electrical parts
- The cable and plug have no visible cuts, crushing or signs of overheating.
- The socket is located and protected according to the permitted location.
- Access to the intended means of disconnection.
- The cable route is free from tension, trapping and makeshift joins.
An extension lead, power strip or adaptor is not a substitute for a suitable connection. If a socket needs to be installed, wiring changed, or earthing and protection checked, this should be done by an electrician in accordance with local requirements. Do not carry out this check using household measurements on live parts.
Cases that require a separate assessment
For an appliance from another market or an independent power source, check voltage and frequency compatibility. If connections are damp, damaged, smell of burning, or cause repeated tripping, do not energise the appliance to test it.
The initial start-up checks operation once the power supply has been addressed; it does not, by itself, certify that the circuit is safe.
If you cannot confidently compare the rating plate with the installation, give these details to an electrician before plugging in the appliance.
View all articles in Washing machine installation: requirements and checks
