The drain hose must be positioned at the specified heights and connected as indicated for the model. Pumped drainage and gravity drainage do not necessarily use the same route.
Identify the type of drain connection
The outlet may connect to a standpipe, a designated trap connection or a sink outlet. The installation must handle the flow rate and discharge temperature, and maintain the required protection against backflow. The connection for a portable appliance may be temporary and use a different method of securing the hose.
Details from the manual to follow during installation
- Minimum and maximum height, if specified, and the point from which these are measured.
- Insertion depth and whether an air gap is required.
- Route length and approved extensions.
- Bend radius, support and method of securing the hose.
- Accessories and type of connection to the building drain.
The hose must remain secured without being crushed. Blindly sealing a standpipe or inserting the hose too far can affect the intended ventilation. Dimensions for another brand are not a substitute for those specified for your appliance.
Why water may drain away while the machine fills
An incorrectly routed hose can create a siphoning flow. If the outlet relies on gravity, the height difference plays a different role, and copying a raised route may prevent drainage. The hydraulic circuit helps distinguish between the two designs.
For a shared drain, also check the capacity and whether water can flow back between appliances. If the machine fills and loses water at the same time, note what happens and check the connection rather than assuming the pump has failed.
Before testing, compare the complete hose route with the diagram in the manual, including the washing machine's final position.
View all articles in Washing machine installation: requirements and checks
