How to measure a washing machine and the space where it will be installed

Measure the space the washing machine needs when closed and the space it occupies when in use. The space must allow for connections, opening and servicing, as well as passage along the route into the home.

Take measurements using the manufacturer's drawing

  1. Note the width, height and depth, and identify what each measurement includes: cabinet, door, controls and protruding parts.
  2. Mark the path of the open door or lid and the space needed to access the drum without obstruction.
  3. Allow the clearances specified for hoses, the cable, ventilation and space between the appliance and furniture.
  4. Check that the detergent drawer can open and that the filter or available maintenance point is accessible.
  5. Measure the doors, corridors, lift and turns the appliance must pass through to get in or out.

A marketed depth may refer only to the cabinet. Pushing the machine all the way back until it fits could bend a hose or leave a connection with no room to move.

What to check at the installation site

The space may vary in width between the front and back, or have skirting boards and pipes that reduce the usable space. Measure at several points and use the most restrictive measurement along with the installation clearances. Do not assume that a door is reversible.

To convert dimensions, 1 inch is exactly 2.54 cm. Keep enough precision when converting, and do not round in a way that eliminates a necessary clearance.

Installations with additional requirements

An integrated cabinet adds panels and hinges; stacking adds height and servicing requirements for the combined unit. Also plan the move: the final space alone does not ensure access.

Compare the actual measurements along the route and in the space with the complete installation plan, not just a single width measurement.

View all articles in Washing machine capacity and dimensions: how to interpret the figures