The manual drawer should be cleaned along with its approved inserts and the accessible housing. Removal varies by model: not all drawers come out completely, and not all parts are dishwasher-safe.
Identify the drawer and removable parts
Check the manual for the release catch and compartments. The fabric softener insert or siphon may have a specific position; note how it is fitted before removing it. If automatic dispensers are connected to circuits, use their specific procedure.
Whirlpool notes in its cleaning guide that complete removal and dishwasher compatibility vary between dispensers. Avoiding the temptation to pull harder when you meet resistance is part of the preparation.
Remove the inserts without deforming the plastic
- With the machine stopped and disconnected from the power supply for manual work, remove the drawer using its release mechanism.
- Remove only the inserts described as removable. Do not disconnect pipes or connections behind the housing.
- Rinse the parts using the water and method permitted. If there is dried detergent or gelled fabric softener, soften and remove it gradually as directed in the manual; use a soft brush if permitted.
- Clean the visible recess with a slightly damp cloth. Do not insert tools into water outlets or wet internal areas.
- Rinse, dry and fit the inserts in their correct positions. Slide the drawer back in without forcing the runners.
Check the assembly and product flow
Check that the siphon is not raised, twisted or out of place. Do not change its position in an attempt to empty a compartment. A small amount of water left afterwards may be due to the design; compare what you observe with the manual.
If the problem continues when the parts are clean and correctly fitted, distinguish between product left in the dispenser and water coming out through the drawer. Cleaning does not confirm a pressure or valve fault. For widespread dark film in the housing, see contamination in damp areas.
Keep the original inserts and do not swap parts between similar-looking compartments. Their correct fit affects dispensing and emptying.
View all articles in Which Washing Machine Components to Clean and How to Identify Them
