Automatic dosing does not dispense, or dispenses the wrong amount

Before assuming that automatic dosing is faulty, confirm that it is enabled for the cycle, that the product is compatible and that the reservoir is correctly positioned. The smell of the laundry does not indicate how much detergent has been dispensed.

Rule out settings and product supply issues

  1. Check the manual to confirm that the programme supports the function and that it is selected.
  2. Check the concentration and dose settings for the product being used.
  3. Check that the reservoir is filled, is the correct one and is properly seated, without exceeding the indicated marks.
  4. Only carry out the automatic dosing cleaning authorised for that model.

If product is left in a conventional detergent drawer, follow the detergent dispensing and flushing diagnosis; this does not mean that an automatic pump is present.

How to interpret the refill alert

An alert when the reservoir is full does not confirm that a sensor is faulty. On the appliances described in this Samsung help article, the alert may remain until the next dose is dispensed. Check what is expected for your model.

If the product is still not dispensed, or too much is dispensed, despite the correct settings, a technician should check the suction, air in the circuit, blockages, pump and level detection according to the design.

When it needs repair

The repair may involve the tubing, dosing assembly or electronic control. The diagnosis and spare part identification should specify which component is being supplied and how the dispensed amount will be verified.

Do not use a universal purge procedure, insert tools into the inlets or open sealed cartridges. If the manual allows an alternative manual dosing method, follow its instructions to avoid dispensing a double dose.

Record the product, selected concentration, cycle and exact message. This information helps distinguish a pending alert from a persistent failure to dispense.

View all articles in Diagnosing and repairing washing machine components