If a semi-automatic washing machine does not drain or loses water during washing, first identify whether it drains by gravity or with a pump. In manual systems, both issues may be related to the selector and the drain valve.
If it does not drain
Check that the control is set to the drain position and see whether the external hose is crushed or blocked. Compare its route with the model manual. Do not copy the height used for a pump-driven automatic machine.
Haier documents a low gravity outlet in its hose guidance for certain twin-tub models. Its measurements and modifications apply to that configuration; they do not justify cutting any hose.
If it does not retain water
Check that the selector is set to washing and that a drain command is not still active. If the control does not produce the expected change or water continues to drain, the mechanism, operating cable or valve should be checked, depending on the design.
An object may prevent the valve from closing, but do not insert tools towards the valve from inside the tub. Inspection of internal pipes requires authorised access.
If the model has a pump
The drainage route includes the drain pump and its control; do not attribute the problem to a gravity valve that the appliance may not use. To recover retained water, refer to the safe draining instructions.
Do not disable the valve or improvise a plug to retain water: the appliance must be able to switch between washing and draining in a controlled manner.
View all articles in Faults in semi-automatic and twin-tub washing machines
