If only the spin tub is not working, check its lid, timer control, load distribution and drainage. The wash function may still work because it uses a different mechanism.
Check the spin cycle setup
Stop the machine and disconnect it from the power supply before rearranging the clothes. Check that no garment is caught outside the basket, and fit the inner lid if your model requires one. Close the outer lid properly and use the control as instructed in the manual.
Make sure the water can drain out. If it is not draining, check the semi-automatic washer drainage before attributing the fault to the motor.
What to note about the behaviour
- There is no response when the timer is turned on.
- A humming sound is heard, but the basket does not start moving.
- It starts slowly or stops with a permitted load.
- There is rubbing, or signs that a garment is caught outside the basket.
The brake, transmission, capacitor, if fitted, and the motor need to be checked individually. A humming sound does not confirm which one has failed.
If it does not stop as it should
A basket that does not stop as intended when the lid is opened is a safety issue. Stop using the machine and arrange for it to be inspected. Do not bypass the lid switch to improve starting, or put your hand near a moving basket.
Do not help the basket turn by hand while the machine is connected to the power supply; it should start with the safety features working.
View all articles in Faults in semi-automatic and twin-tub washing machines
