If a semi-automatic washing machine does not drain or loses water during the wash, first check whether it drains by gravity or by pump. In manual systems, both issues may depend on the selector and outlet valve.
If it won’t drain
Check that the control is set to drain and see whether the external hose is crushed or blocked. Compare its route with the model’s manual. Do not copy the height used for an automatic washing machine with a pump.
Haier documents a low gravity-fed outlet in its hose positioning guidance for certain twin-tub models. Its measurements and modifications apply to that configuration; they do not justify cutting any hose.
If it won’t hold water
Check that the selector is set to wash and that a drain command is not still active. If the control does not produce the expected change or water continues to flow out, the mechanism, operating cable or valve should be checked, depending on the design.
An object may prevent the valve from closing, but do not insert tools towards the valve from inside the tub. Inspection of the internal pipework requires authorised access.
If the model has a pump
The drainage route includes the drain pump and its control; do not blame a gravity-fed valve that the appliance may not use. To recover retained water, check the safe draining instructions.
Do not bypass the valve or improvise a plug to retain water: the appliance must be able to switch between washing and draining in a controlled way.
View all articles in Faults with semi-automatic and twin-tub washing machines
