On a semi-automatic washing machine, pauses and changes of direction depend on the timer and the machine’s design. A lack of movement or a new imbalance should be compared with that sequence, not with another washing machine.
Check the load and visible condition
With the machine stopped and unplugged, check whether a garment or object is blocking the accessible area around the pulsator. Do not lever under the pulsator or force it to release it. Follow the recommended load and water level for the wash.
If the timer knob has stopped advancing or is not carrying out the selected setting, note this behaviour without turning it beyond its limits.
What the inspection can indicate
Note whether it does not work in either direction, whether the movement changes in strength, or whether it only fails after a certain amount of time. Operation in just one direction can be related to several different components; it does not automatically mean that the capacitor is faulty.
The pulsator and its mounting must transmit the movement received from the shaft. If the movement is not transmitted, the belt (if fitted), the motor and the timer will need to be assessed according to the wiring diagram.
Limits of checks at home
Do not observe the motor with a panel removed while the power is on, or change wires to reverse the direction. A competent professional should compare the contacts and operation using the appropriate documentation.
Describe whether the fault affects the direction, the start-up or the strength of movement; these are different details, even if the clothes are not getting washed.
View all articles in Faults in semi-automatic and twin-tub washing machines
