If a semi-automatic washer won’t drain or loses water during the wash, first determine whether it drains by gravity or with a pump. In manual systems, either issue may be related to the selector or the drain valve.
If it won’t drain
Confirm that the control is set to drain, and check whether the external hose is crushed or blocked. Compare its routing with the model’s manual. Don’t copy the hose height used for an automatic washer with a pump.
Haier documents a low gravity-drain outlet in its hose-routing guidance for certain twin-tub washers. Its measurements and modifications apply to that configuration; they don’t justify cutting any hose.
If it won’t hold water
Check that the selector is set to wash and that a drain command isn’t still active. If the control doesn’t make the expected change or water keeps draining, the mechanism, control cable or valve should be inspected, depending on the design.
An object may prevent the valve from closing, but don’t insert tools into the tub towards the valve. Inspection of internal lines requires authorized access.
If the model has a pump
The system includes the drain pump and its control; don’t blame a gravity-drain valve that the appliance may not use. To recover retained water, check the safe draining instructions.
Don’t disable the valve or improvise a plug to hold water in: the appliance must be able to switch between washing and draining in a controlled way.
View all articles in Faults in semi-automatic and double-tub washing machines
