If a semi-automatic washing machine won’t drain or loses water during washing, first identify whether it drains by gravity or with a pump. In manual systems, both issues may be related to the selector and outlet valve.
If it won’t drain
Check that the control is set to the drain position and see whether the external hose is crushed or blocked. Compare its routing with the model’s manual. Don’t copy the hose height used for an automatic machine with a pump.
Haier documents a low gravity outlet in its hose guidance for certain twin-tub models. Its measurements and modifications apply to that configuration; they don’t justify cutting any hose.
If it won’t hold water
Check that the selector is set to wash and that a drain command isn’t still active. If the control doesn’t produce the expected change or water keeps flowing out, the mechanism, operating cable or valve should be checked, depending on the design.
An object may prevent it from closing, but don’t insert tools towards the valve from inside the tub. Inspection of the internal pipes requires authorised access.
If the model has a pump
The system includes the drain pump and its control; don’t blame a gravity valve that the machine may not use. To recover the retained water, check the safe draining instructions.
Don’t bypass the valve or improvise a plug to hold water in: the appliance must be able to switch between washing and draining in a controlled way.
View all articles in Faults with semi-automatic and twin-tub washing machines
