How to inspect and replace washing machine hoses and connectors

An inlet hose, a drain hose and an internal hose are not interchangeable. Replacement must match the circuit, its connections and the model’s sealing components.

What to look for in a damaged hose

With the appliance isolated and the water supply turned off, an external inspection may reveal cracks, scuff marks, bulges, crushing or a displaced fitting. A hose that appears dry may also fail only during the operation that uses it.

If water is leaking from beneath the machine and the source is not visible, follow the leak-location steps before choosing an internal hose.

Preparing for a replacement

  1. Identify the circuit and the applicable part number, including seals and clamps.
  2. Check whether the manufacturer permits users to access that area. Reaching internal hoses may require technical disassembly.
  3. Disconnect the power and water supply, and carefully remove any contents that may spill when the joint is separated.
  4. Reconnect everything without twisting or pulling the hoses, and keep them clear of moving parts and edges.
  5. With the appliance fully reassembled, check for leaks and confirm that it works using the prescribed procedure.

Do not try to fix the symptom with a patch

Glue, tape or undocumented joins may fail under pressure or movement. An overtightened clamp can also damage the material; its position and tightness must be suitable for that joint.

On gravity-drain appliances, changing the hose route to that of an automatic machine may prevent drainage. The required height and length depend on the installation and cannot be determined from the new part alone.

If a hose keeps rubbing against something or becoming deformed, check its route and the strain it is under before simply replacing it again.

View all articles in Diagnosing and repairing washing machine components