Abnormal washing machine noises and vibrations

Abnormal washing machine noises and vibrations

To interpret a noise, consider its type alongside the cycle phase and the movement observed. A thump, a roar and a hum each call for different checks.

Which sound is most prominent

Sound or movementRelevant guide
Thumping and movement as the machine speeds upExcessive vibration and rocking
A continuous roar that gets louder as the speed increasesLoud spin-cycle noise
Scraping or rattling with each rotationMetallic rubbing and objects
Humming without water intake, movement or drainingOperation that does not take place

A noise can travel through the casing and seem to come from another area. It does not identify a component just because it can be heard near it.

Before suspecting an internal fault

With the machine stopped, check for visible objects in the laundry, contact with furniture and external hoses hitting the casing. If it began after installation, note that; if it gradually got worse, describe how it changed.

Do not push an object out of sight. The recovery between the drum and tub depends on authorised access and may require a technician.

When to stop

Violent thumping, movement, continuous rubbing against the seal, a smell or smoke are reasons to stop using the machine. Do not hold the washing machine while it is spinning or remove panels to listen close to the motor.

Frequently Asked Questions

Does a new sound always mean a part needs replacing?

No. It may come from a buckle, contact with furniture or a normal operation that had not been noticed before. Whether it persists and any associated signs determine whether it needs inspection.

How can I record a noise so it is useful for diagnosis?

Record it from outside without moving the machine or removing panels, and note when it occurs. Do not run another test if there is already thumping, intense rubbing or any sign of an electrical problem.

Why does the noise change depending on the cycle phase?

Water intake, pumping and washing movements use different systems. The speed also increases during the spin cycle, which can change the sound's intensity.

A recording made from a safe position can help; include the programme, cycle phase and load so the sound has context.