The washing machine makes a loud roaring noise during the spin cycle

A roar that gets louder as the machine speeds up may be related to support or drive components. The sound alone does not confirm that the bearings need replacing.

Distinguish roaring from banging

Describe whether the noise is continuous and follows the speed, or consists of separate impacts. It also matters whether it started gradually, began after the appliance was moved, or coincides with visible play.

You do not need to repeat a high-speed spin cycle to prove that the sound gets louder. Use observations you have already made, and stop using the machine if the noise is accompanied by rubbing, movement or an abnormal drum position.

What a manual rotation can tell you

With the washing machine unplugged and opened according to the usual procedure, a gentle check may reveal roughness if the design allows the drum to be turned by hand. Do not force brakes or drive components that are meant to resist movement.

If the sound is also present in this condition, it points towards mechanical parts, but you still need to distinguish between bearings, parts making contact and drive mechanisms. If there is play or misalignment, describe it as a second symptom.

What the inspection should confirm

Bosch lists bearings and other internal components among the possible causes in its washing machine noise support. The technician needs to identify the point of wear and check the condition of the shaft, seals and associated supports. The repair should not be chosen based on a comparison such as “it sounds like an aeroplane”, as different faults can sound similar.

Do not apply lubricants from the outside to silence a sealed bearing. Temporarily reducing the noise would not prove that the support is still in good condition.

Ask for the component and associated damage to be identified before agreeing to a bearing replacement based only on the sound.

View all articles in Abnormal washing machine noises and vibrations