If an object has fallen outside the drum, stop using the washing machine. It should only be retrieved through an accessible, authorised route; internal access may require technical dismantling.
First, check what has gone missing
Check the removed laundry, the visible interior and the accessible folds of the seal, with the appliance unplugged. Use a light, and do not put your fingers where you cannot see. If the object has sharp edges or is stuck, do not pull it out forcefully.
A coin or metal part may also still be in the laundry or drum. Rubbing or rattling does not confirm that it is between the tub and drum.
Access depends on the model
The filter, a removable drum paddle or a maintenance opening is a recovery route only if specified by the manufacturer. Before opening a drain access point, follow the safe draining. Not all machines have a user-accessible filter.
Do not remove the heating element or open an internal hose based on a generic instruction. Reassembly must restore the seal, fastening and positioning; an incorrectly closed access point can cause a leak.
When to arrange a technical inspection
If the object is not visible, the drum meets resistance, part of a drum paddle is missing, or the door seal is damaged, leave the appliance isolated. Give the service technician a description of the object and the noise you noticed.
Do not push through the holes or run a spin cycle to eject it. A fragment may move into areas that are more difficult to access.
After retrieving the part, check that it is complete; if a fragment is missing, continue the inspection before using the appliance again.
View all articles in Abnormal washing machine noises and vibrations
