Wash heater element: checking and replacement

The element that heats the water can fail due to an electrical open circuit or loss of insulation. A continuity test covers only part of the diagnosis and does not prove that it is safe.

Confirm which part is not working

Start by checking the conditions for a wash cycle that does not heat: programme, water supply and expected behaviour. The water level, sensor or electrical control may also be involved. Not all appliances have a water heater.

A technical diagnosis distinguishes between an open circuit, faulty insulation and the absence of a heating command. If an electrical protection device trips, do not keep repeating cycles to try to link it to a particular stage.

Measurements and replacement parts

Checks require model-specific information, suitable instruments and safe isolation. Continuity does not mean that insulation from parts that must remain protected is sound.

The replacement part must match in shape, specifications, seal and applicable mounting points. The temperature sensor may need to be checked separately, even if it is close to the heater.

Fitting and validation

The Electrolux procedure for its documented heater includes draining the appliance beforehand and taking care with the seal. Rear access in that example is not universal.

Restore the position, fastening, connections and watertightness in accordance with the manual, then carry out the specified electrical and functional checks. Tightening a seal more does not guarantee a better seal. The air heater in a washer-dryer is part of a different circuit and needs its own diagnosis.

A heater repair must verify both heating performance and electrical safety, as well as the seal of the tub that was worked on.

View all articles in Diagnosing and repairing washing machine components