Temperature sensor and thermostat: checking for faults

A temperature probe can only be assessed by comparing its response with the specification and the actual test temperature. A single reading is not enough to determine whether it is working or faulty.

Identify the function of the part

A resistive probe, such as an NTC thermistor where used, provides input to the control. A regulating thermostat switches according to its design. A safety limiter interrupts a hazardous condition. Their proximity to a heat source does not make them interchangeable.

The documentation determines which components are present, where they operate, and whether they belong to the wash-water or the drying circuit.

What distinguishes a reading fault

In the event of no heating or excessive temperature, the technician compares the temperature measurement, wiring and connectors with the control's response. A broken conductor can appear to indicate a faulty probe.

Testing a probe requires knowing the temperature and the manufacturer's curve or table. A switching component must be tested under its own specified conditions. Do not transfer values or methods from one component to another.

When to check other components

A correct reading does not confirm that the heating element is receiving the right command. If a thermal protection device has tripped, investigate why that condition occurred before restoring operation.

Do not bypass limiters, adjust sealed thermostats, or select a probe based on its shape or cable length. Any replacement must preserve the specified electrical characteristic, thermal contact, sealing and mounting.

Record the reference temperature and method used alongside the diagnosis; without this context, a resistance value provides little information.

View all articles in Diagnosing and repairing washing machine components