The washing machine is not heating the water

Before diagnosing a lack of heat, check whether the washing machine heats the water internally or receives hot water from the supply. Touching the glass or clothes at the end of the cycle does not tell you the temperature reached during the wash.

Identify the system and programme

Check the manual to see whether there is an internal heater and how the temperature is regulated. On machines with two inlets, a missing hot-water supply or an incorrect connection requires diagnosis of the hot and cold water inlets.

Check whether the programme limits the temperature or uses a different phase from the one you expected. The selected temperature and programme label should be interpreted according to the documentation; the rinse that follows may use cold water.

Which signs provide the most useful information

  • A heating-related error code identified for that model.
  • A repeated interruption during a documented heating phase.
  • A persistent change compared with the same programme under comparable conditions.
  • A supply inlet failure when the design requires it.

Do not open the machine during a wash or insert a thermometer to take a reading. A long programme by itself does not prove that the heating element is damaged.

Diagnosing the internal circuit

If the machine has a heater, the inspection must distinguish between the heating element, temperature sensor, water level and control signals. Continuity in one component does not confirm that the entire circuit is working.

Provide the exact programme and the condition observed, without treating the temperature you feel at the end as a measurement of the wash.

View all articles in Electrical and heating faults in washing machines