When the control panel is on, failure to start usually calls for checking the selected setting and start conditions. It does not prove that the control board is damaged.
Check the command it received
- Confirm that you selected a cycle and pressed Start as instructed in the manual. Some controls require you to hold or confirm a specific command.
- Check the delayed start or end. The time displayed may indicate a programmed delay.
- Check whether the child lock is active; do not try key combinations from other brands.
- Check the door or lid lock indicator. Fitting the latch into place does not guarantee that the machine has detected it.
- Check whether it tries to drain or fill without getting any water before proceeding.
If the button does not register the command
Distinguish between a confirmation sound or visible change and a complete lack of response. If a button does not work or the selector shows a different position, continue to controls not responding.
Do not press repeatedly or hit the panel. A delayed response may be mistaken for a lock when the machine is still processing an expected status.
When the power status changes
If all the indicators go out, stop treating this as a start-up condition and check no power. If it remains on and displays a message, note down the complete text before cancelling.
Note what changes immediately after you press Start: the door lock, sound, display and water intake help identify where the machine stops.
View all articles in The washing machine does not start, stops or does not finish the cycle
