A delayed start postpones the beginning; a delayed end aims to finish later. Before scheduling the load, check whether the display shows a clock time or a number of hours from now.
Work out the setting as a specific time
If it is 18:00 and you select a start in three hours, the wash would begin at around 21:00; the programme duration still needs to be added. If you select an end in three hours, the machine calculates when to start in an attempt to finish at around 21:00. These examples explain the logic; they do not describe the buttons on any particular model.
Check the estimated time after selecting the programme and options. The machine may adjust the duration according to actual conditions, so the predicted finish time should not be treated as an exact appointment.
Prepare a load that can wait
- Check that the garments and level of soiling are suitable for a wait, and avoid leaving contamination that needs immediate attention.
- Check the detergent and its method of adding it for a delayed start. Do not allow concentrated product to remain in prolonged contact with the clothes.
- Check any remembered options and confirm that the delay has been activated.
- Plan to remove and dry the load when the cycle ends.
Follow the supervision conditions in the manual. If you need to change the timing after the cycle has started, follow pause and cancel; do not force the door open just because the display shows that the machine is waiting.
If the wash has finished and the clothes have remained inside longer than expected, decide how to deal with them based on their condition after being left in the machine.
View all articles in Washing machine programmes, settings and controls
