The washer powers on but won’t start the cycle

When the control panel is on but the washer won’t start, check the selected settings and start conditions. This doesn’t prove that the control board is damaged.

Check the command it received

  1. Confirm that you selected a cycle and pressed Start as instructed in the manual. Some controls require you to press and hold or confirm a specific command.
  2. Check the delayed start or end time. The time displayed may indicate a scheduled delay.
  3. Check whether the child lock is on; don’t try button combinations from other brands.
  4. Check the door or lid lock indicator. A latch clicking into place doesn’t guarantee that the washer has detected it.
  5. Check whether it tries to drain or fill but can’t get water before moving on.

If the button doesn’t register the command

Distinguish a confirmation sound or visible change from a complete lack of response. If a button doesn’t work or the selector shows a different position, continue with controls that aren’t responding.

Don’t press repeatedly or hit the control panel. A delayed response can seem like a lockout when the washer is still processing an expected state.

If the power status changes

If all the indicators go out, stop treating this as a start-up issue and check power loss. If the washer stays on and displays a message, note the full message before cancelling.

Note what changes right after you press Start: the lock, sound, display and water intake can help pinpoint where the cycle stops.

View all articles in The washer won’t start, stops or won’t finish the cycle