The washing machine switches on but won’t start the programme

When the control panel is on, a failure to start usually means checking the selected setting and the starting conditions. It does not prove that the control board is damaged.

Check the command it received

  1. Confirm that you selected a cycle and pressed start as described in the manual. Some controls require you to hold or confirm a specific command.
  2. Check the delayed start or end. The time shown may indicate a programmed delay.
  3. Check whether the child lock is active; don’t try button combinations from other brands.
  4. Check the door or lid lock indicator. The latch engaging does not guarantee that it has been detected.
  5. Check whether it tries to drain or fill but cannot get water before moving on.

If the button doesn’t register the command

Distinguish a confirmation sound or visible change from a complete lack of response. If a button fails or the selector shows a different position, continue to unresponsive controls.

Don’t press repeatedly or hit the control panel. A delayed response can be mistaken for a lock when the machine is still processing an expected state.

When the power state changes

If all the indicators go out, stop treating it as a start-up condition and see no power. If it stays on and displays a message, note the full text before cancelling.

Note what changes immediately after you press start: the lock, sound, display and water intake can help pinpoint where it stops.

View all articles in The washing machine won’t start, stops or won’t finish the programme