First distinguish between a door that does not fit properly and one that closes but is not recognised by the control system. A mechanical click does not confirm that the electrical safety device is working.
If it does not fit physically
With the machine stopped and isolated, remove any clothes caught in the closing area. Check the latch, handle, hinge and housing without inserting any tools. A sagging door or a broken part needs mechanical repair; do not force it shut.
If the hinge or handle has visible play, do not adjust the latch to hide it. Do not hold a lid down with a weight or tape either.
If it fits but the programme does not start
Check which indicator is displayed and at what stage that model locks. Some lids do not lock immediately when switched on. Check the start command and the programme start conditions in the manual.
If the door-closed warning remains when the door is correctly aligned, the diagnosis must distinguish between the latch, wiring, the safety device and the control system. An intermittent contact cannot be identified by the sound of the mechanism alone.
What not to use as a test
Do not bridge terminals, bring magnets near sensors to trick them, or hold the latch by hand during the cycle. Functional testing must be carried out with the appliance assembled and its safety guards restored, following the prescribed procedure.
Tell the service technician whether it “does not fit” or “fits but shows the door-open warning”; avoid replacing the lock before checking the alignment.
