Washing machine panel, buttons or selector not responding

If the panel has power but does not respond to commands, check the control lock and programme status before suspecting a button or the interface. If the selector registers a different position, it needs to be observed differently.

Check which commands are available

The child lock may disable some of the controls. Some options cannot be changed after starting, or may not be compatible with the programme. Check the manual and note the symbol shown.

With the appliance stopped, check for surface moisture or dirt. Clean it only as permitted by the manufacturer; do not spray any product on the buttons or open the panel to dry it.

Describe what is not responding

  • One particular button does not work, while the others do.
  • The selector shows a different position or changes erratically.
  • The display freezes and none of the usual commands register.
  • All the indicators disappear completely.

The last case is a power supply failure. The others may require you to distinguish between a button, selector, connection and interface.

When a reset may be appropriate

If there are no signs of risk and the manual allows it, perform the approved reset after noting the current state. Do not access service mode using a button combination found for a different model.

If the problem returns, request electronic diagnostics and note which commands were working. Hitting or forcing the control does not confirm which component is at fault.

A response returning after a reset does not prove that an intermittent button or connection has been repaired.

View all articles in The washing machine does not start, stops or does not finish the cycle