A washing machine that is completely unresponsive may have no power supply or an internal power or control fault. A dark display alone does not prove that the control board is faulty.
First, rule out any dangerous situation
If you notice water near electrical connections, burn marks, a damaged cable or an electrical smell, do not plug the appliance in again. Isolate the power from a safe location and arrange for an inspection.
External checks
Check the power switch position and whether the installation has an accessible power switch intended for this purpose. Check whether there has been a known power cut and which other points have lost power, without dismantling the socket or inserting anything into it.
Inspect the cable and plug only from a dry position. Do not move a heavy machine or pull on the cable. If a protective device has tripped, refer to the electrical tripping diagnosis rather than resetting it repeatedly.
Bosch lists the power supply and door among the causes of a machine not starting in its starting problems guide. In this case, the complete absence of indicators points first to a power supply issue; if the panel is active but the machine does not start, refer to a different diagnosis.
If the power supply is working properly
The internal power supply, mains filter, connections or electronics should be checked using the applicable circuit diagram. Do not use an extension lead, adaptor or makeshift socket to work around a possible problem with the electrical circuit.
If the socket has not been checked or the cable is damaged, have the electrical issue attended to before attributing the lack of lights to the appliance.
View all articles in Electrical and heating faults in washing machines
