How to restart a washing machine and when it may help

A restart may restore the controls, but it will not fix a leak, blockage or damaged part. Before restarting, note down the message and check for any signs of danger.

Four different actions

ActionWhat changes
Cancel the cycleStops the operation using the controls and may start draining or a waiting period
Power resetTurns the appliance off and back on using the permitted procedure
Reset settingsMay erase preferences or connections, depending on the model
Enter diagnosticsAccesses checking functions; this is not the same as a household reset

Before following a sequence

Note down the exact code, programme, stage and any visible water. Check for leaks, electric shocks, smoke, odour or unusual heating. If any of these occur, stop using the machine rather than trying to clear the warning.

Check the manual for your model and market for the button presses and waiting times. There is no universal combination, and unplugging the machine does not necessarily unlock the door straight away.

How to interpret the result

If the controls work again, check what the initial condition was: failure to start, cycle stoppage or unresponsive panel. If the fault returns, the restart has restored a state without removing its cause.

Do not repeat the process in a loop or try technical modes from unknown sources. Some functions change settings that users do not need to adjust.

Use the permitted recovery procedure as one specific troubleshooting step, not as proof that the washing machine has been repaired.

View all articles in The washing machine does not start, stops or does not finish the cycle