
To interpret a Maytag alert, you need to distinguish between front-load, HE top-load and control-panel functions. The references in this index come from North American support.
Two types of control panel
Front-load washer codes may include separate groups, such as F8 E1. HE top-load washers also display words or abbreviations such as drn, lid and Ofb. Copy every character before choosing a guide: do not interpret a lid message as a door message.
In the official front-load table, LOC/LC identifies locked controls; dET depends on whether the dispenser uses a cartridge. These are different from a general failure to start.
Water, suds and load
If the appliance is slow to fill, see F8 E1, LF and Lo FL. If the problem occurs while draining, F9 E1 and drn distinguish the checks by platform. Do not assume the pump needs replacing just because water remains.
Suds have their own troubleshooting steps under Sud and Sd. For laundry, distinguish Ofb, an unbalanced load from OL, an overload. In both cases, the selected programme matters, as well as how much the drum can physically hold.
Brief alerts and limited checks
Int may accompany a pause or cancellation; rL/F34 means removing items from the Clean Washer cycle on compatible front-load models. On top-load models, PF indicates that there has been a power cut, while lid means you should check the lid and the cycle status. Follow the manual to continue: there is no reset that works for every situation.
If there is a leak, an electrical smell or a faulty door lock, stop using the appliance. When requesting service, note the identification details from the rating plate and when the alert appeared.
Frequently Asked Questions
Where can I find the full model number of my Maytag washing machine?
The full number is on the rating plate and is usually included in the appliance documentation. Check the manual to find the plate on your design; the range name is not a substitute for that reference.
Does the same code mean the same thing on all its washing machines?
Not necessarily. Maytag front-load and HE top-load models have different tables and controls; also confirm the market the appliance is intended for.
How can I tell a normal alert from a fault?
Check whether the message describes a selected function, such as Control Lock, or a condition that has prevented the cycle from finishing. A drain delay after cancelling does not follow the same troubleshooting steps as a drain that repeatedly fails.
Does clearing the code confirm that the problem is fixed?
No. If the machine displays it again under the same conditions, the cause has not been resolved. A code disappearing after the power is disconnected is no reason to continue using the machine if there is a leak or a faulty lock.
What information should I give the service technician?
Give the model and serial numbers, the complete code, and say whether the machine is front-load or top-load. Include when it stops, what is left inside, and whether you changed the load, product or connections just before the problem started.
If a code is not listed here, look it up in the exact model's manual; do not automatically apply another brand's interpretation.




