HC warning on Maytag washer: water connections reversed

On the documented Maytag HE top-loaders, HC warns that the hot and cold water supplies are connected to the opposite inlets.

Identify both connections

This meaning comes from the manufacturer's documentation for appliances with two inlets. Check the labels on the appliance and follow the hoses to each tap. Colour or left-right position is not a substitute for identifying them.

If you confirm that they are reversed, stop the machine and turn off the water supply before disconnecting anything. Correct only the connections that the manual allows the user to adjust and that you can reach without moving the appliance or straining the power cord. Keep a container ready for any residual water and leave the seals in place.

After repositioning the hoses

Turn on the taps and check the connections before carrying out the specified test wash. If you see any drips, do not continue: correct the installation or seek help. If an inlet is not supplying water, this is a separate check from swapping the inlets; see hot or cold water problems.

If HC persists despite the connections being correct, seek assistance. Do not apply this interpretation to a single-inlet Maytag or another platform without checking its manual.

A photograph showing the routing of both hoses can help the installer check that the correction has been carried out properly.

View all articles in Maytag washing machine error codes and alerts