F9 E1 error or drn alert on Maytag: drainage problems

On a Maytag front-load washer, F9 E1 indicates that draining is taking too long. On an HE top-load washer, drn indicates a drainage problem; installation and access to the filter vary by model.

Water retention and household drainage

According to the manufacturer’s documentation, a blockage along the drain path or excess suds can delay draining. Check whether the hose is kinked, whether the issue began after connecting it under a sink, and whether the household drain is also clogged. Do not infer the condition of the pump from its sound alone.

Clean only the filter intended for user access

Check the manual before opening a cover: some designs do not allow access to the pump from the outside. If there is a user-accessible filter, safely stop and disconnect the washer, let the water cool and keep a container ready. Drain the water slowly through the specified route before removing the filter.

Refit it with no debris on the seal, and check that it is closed properly before using the washer again. The drain filter cleaning guide explains how to prepare. A drain height copied from another platform may make the problem worse; use the height specified for your Maytag.

If water is still being retained after these accessible checks, stop starting cycles and request a diagnosis. For drn, clearly state that it is an HE top-load washer.

If detergent has built up on the clothes, do not add another full dose just because you cancelled the programme.

View all articles in Maytag washing machine error codes and alerts