dET indicates that a cartridge has not been detected in compatible Maytag models; F8 E2 points to the dispenser system. Identify the message before cleaning or changing the settings.
Cartridge missing or incorrectly fitted
For dET, the manufacturer's documentation recommends checking that the cartridge is fitted correctly and that the drawer is closed. First check whether you intend to use automatic dispensing or the supported manual alternative. A cartridge message does not mean you have to install one when the model allows you to use a single dose.
The system displays F8 E2
Check for detergent build-up on the drawer parts that the manual says can be removed. With the cycle stopped, clean these parts and refit them correctly. Do not insert objects into internal channels or dilute the product with mixtures that the manufacturer does not allow.
If the product is still not used after cleaning, note which reservoir is affected and which programme you were using. The dispenser not dispensing guide distinguishes between no product being used and the wrong amount being dispensed.
A clean drawer does not confirm that the internal system is working, just as a recognised cartridge does not prove that it is dispensing. If the message returns, contact service and provide those two details separately. Do not compensate for the suspected fault by adding a second dose without checking the active mode.
Keep the dispenser system name and the complete message handy to avoid following instructions for a different design.
View all articles in Maytag washing machine error codes and alerts
