F5 E2 error on a Maytag washing machine: the door does not lock

F5 E2 on the documented Maytag front-load washer indicates that the door lock is not completing its cycle. A trapped garment or a load pressing against the latch are the first things to check.

Check the fit with the machine stopped

The manufacturer’s documentation places the problem at the front door latch. Pause or cancel using your control panel, then wait until the door can be opened. Move any sleeves, drawstrings or garment edges away from the seal. Remove some of the load if it is pressing against the door, then close it again without slamming.

The latch may seem to engage but still not be detected. Note whether you hear an attempt to lock, whether the alert appears immediately and whether the programme started filling with water. Do not insert objects into the latch opening to simulate the door closing.

Retry and next steps

Use only the cancellation and restart sequence in the manual. If the door will not open, there is water inside or the latch remains stuck, follow the door, lid and safety guide before trying to access the laundry.

If F5 E2 recurs when the latch is clear, contact service. Lid alerts for HE top-loaders are listed separately in the Maytag index; they cannot be resolved by applying instructions for a front-load washer.

A door that needs force to close still has a problem, even if the message disappears temporarily.

View all articles in Maytag washing machine error codes and alerts