
The ASKO warnings in this index are based on the W3096RW manual, type WM76S. Keep the decimal suffixes and confirm that the codes correspond before applying them to another generation.
Choose the troubleshooting path based on the full warning
The manual distinguishes E3 for filling, E7 and E7.1 for draining and E7.2 for excess detergent. The decimal suffix helps distinguish incorrect dosing from a drainage restriction.
E13 concerns an unbalanced load. For the door, E2 and E22/E22.1 point to locking, while E23/E23.1 and E24 point to unlocking. A door that is physically closed does not prove that the locking mechanism has finished engaging.
E9/E9.1 relates to leak detection; E11 indicates an excessive water level. If water continues to enter while the warning is displayed, turn off the tap and seek assistance.
Other codes in the WM76S table
| Code | Documented area |
|---|---|
| E0 | Incorrect settings. |
| E1 / E6 | Temperature or heating, respectively. |
| E10 / E10.1 | Water-level detection. |
| E12 | Motor or its control. |
| E26 | Door lock. |
| E36 / E37 | Communication or software compatibility between controls. |
| E40 | Prolonged power supply fluctuations. |
The manufacturer's documentation describes the user reset or check applicable to each case and advises contacting service if the issue persists; E37 requires assistance. This table does not recommend replacing components or entering a service mode.
Remote connection
E48 affects the network and remote control on the WM76S. The manual says you can continue using other programmes from the appliance if there is no other fault; do not treat a loss of connection as a general washing fault.
Frequently Asked Questions
Where can I find my ASKO washing machine's model and type?
On the documented W3096RW, the plate inside the door shows the model, type and serial number. For another generation, check its manual to find the plate and note down all these details.
Why does an error code change between ASKO generations?
Controls, functions and detection systems vary between platforms. Do not apply the WM76S table to an earlier generation unless its manual explicitly confirms that it applies.
Should I note the decimal suffix in the code?
Yes. On the WM76S, E7.1 warns of a reduced drainage flow rate, while E7.2 concerns excess detergent. Leaving out the decimal suffix could lead you to carry out the wrong check.
Does a connection problem prevent me from washing using the control panel?
On the WM76S, E48 affects remote control and does not, by itself, prevent you from using other programmes on the appliance. Confirm the model and check that there is no second washing-related warning before continuing.
Which warnings mean I should stop the washing machine?
A visible leak, water that keeps entering, an overflow or abnormal electrical signs means you should stop the machine. Persistent internal error codes require servicing; do not run programmes repeatedly to try to make them disappear.
The model and type must match the manual: the ASKO logo alone does not identify the generation.




