
The ASKO warnings in this index are based on the W3096RW manual, type WM76S. Keep the decimal points and confirm the same code mapping before applying it to another generation.
Choose the troubleshooting path based on the complete warning
The manual distinguishes E3 filling, E7 and E7.1 draining and E7.2 excess detergent. The decimal point helps distinguish incorrect dosing from a drainage restriction.
E13 relates to an unbalanced load. For the door, E2 and E22/E22.1 indicate a locking issue, while E23/E23.1 and E24 relate to unlocking. A door that is physically closed does not prove that the locking mechanism has finished engaging.
E9/E9.1 indicate leak detection; E11 indicates an excessive water level. If water continues to enter while the warning is displayed, turn off the tap and request assistance.
Other codes in the WM76S table
| Code | Documented area |
|---|---|
| E0 | Incorrect settings. |
| E1 / E6 | Temperature or heating, respectively. |
| E10 / E10.1 | Water level detection. |
| E12 | Motor or its control. |
| E26 | Door lock. |
| E36 / E37 | Communication or software compatibility between controls. |
| E40 | Prolonged power supply fluctuations. |
The manufacturer's documentation describes the user reset or check for each case and recommends contacting service if the issue persists; E37 requires assistance. This table does not recommend replacing components or entering a technical mode.
Remote connection
E48 affects the network and remote control on the WM76S. The manual says you can continue using other programmes on the appliance when there is no other fault; do not attribute a disconnection to a general washing fault.
Frequently Asked Questions
Where can I find the model and type of my ASKO washing machine?
On the documented W3096RW, the plate inside the door lists the model, type and serial number. For another generation, check its manual to find the plate and copy down all these details.
Why do codes change between ASKO generations?
Controls, functions and detection systems vary between platforms. Do not apply the WM76S table to an earlier generation unless its manual expressly confirms it.
Should I note the decimal point in the code?
Yes. On the WM76S, E7.1 warns of reduced drainage flow, while E7.2 relates to excess detergent. Leaving out the decimal point could lead you to carry out the wrong check.
Does a connection problem prevent me from washing using the control panel?
On the WM76S, E48 affects remote control and does not, by itself, prevent you from using other programmes on the appliance. Confirm the model and check that there is no second washing-related warning before continuing.
Which warnings mean I should stop the washing machine?
A visible leak, water that keeps entering, an overflow or abnormal electrical signs mean you should stop the machine. Persistent internal codes require servicing; do not repeat programmes to try to make them disappear.
The model and type must match the manual: the ASKO logo alone does not identify the generation.




