ASKO Error E11: Excessive water level and overflow

E11 on the ASKO WM76S indicates an excessive water level or overflow. If water continues to enter despite the warning, close the tap and request service.

Protective draining or continuous water inlet

The manufacturer's documentation explains that the control may interrupt the programme and start draining when it detects an excessive water level. From outside, check whether the machine is draining water or whether water continues to enter and the level is rising.

If water continues to enter, the manual requires you to turn off the water supply and request assistance. Do not repeatedly restart the machine to check whether E11 disappears, and do not open the door when the water level is high. If there is water near electrical connections, avoid contact and get help to isolate the appliance.

After the protective response

If draining is completed, follow only the recovery procedure permitted by the model's manual. If the error reappears, contact service; this alone does not confirm a faulty inlet valve or sensor.

Record the code, cycle stage and whether water was continuing to enter. A washing machine that overfills explains the difference between a water supply that does not stop and other observations. E9/E9.1 indicates a leak and should not be confused with this water-level warning.

If the water level continues to rise, the key action is to stop the accessible water supply, not to clear the display.

View all articles in ASKO washing machine error codes and warnings