ASKO E2 and E22 errors: Door does not lock

On the ASKO WM76S, E2 and E22/E22.1 are related to the door not completing the locking process. The manual distinguishes between an open door, a door that appears closed and a mechanism that needs to reset.

E2 with the door open or apparently closed

The manufacturer's documentation explains that a door that is not fully closed can spring back during an attempt to lock it. With the machine stopped, move any clothing away from the latch and check that the door closes normally without forcing it.

For certain E2 cases on the WM76S, the mechanism needs about ten seconds to return to its position, and the panel may not respond while you wait. If the door appears closed, the manual advises switching the machine off using the control knob, switching it back on and waiting for the reset. This time is not a rule for every ASKO model.

E22 or E22.1

These alerts indicate that the door is closed but cannot be locked. After checking that the latch is unobstructed, follow the user reset procedure in the manual. If the error appears again, request service.

If the mechanism prevents the door from closing, or you need to use an emergency procedure, check the exact conditions for doing so; do not insert tools based on a generic instruction. If you need to release a door that is already locked, use the door and safety procedure and the relevant unlocking alert.

Note whether the door springs back, stays closed or will not close; these are different situations, even if they share the E2 code.

View all articles in ASKO washing machine error codes and warnings