E9 and E9.1 in the ASKO WM76S manual correspond to leak detection in the washing machine area. Check the exterior and stop using the machine if water continues to escape.
Visible water and water supply
The manufacturer's documentation can help distinguish between a leak and a warning that does not return after the specified check. If there is a visible leak, turn off the accessible tap and request assistance. Do not retry the procedure in the manual while water is still escaping.
Check whether water appears near the inlet, outlet, drawer, door or base. Note when it started and whether any connections were recently touched. Do not dismantle or tilt the appliance to remove water and clear the detection.
If the exterior appears dry
Confirm the procedure for your model before continuing; the absence of a visible puddle does not, by itself, identify the cause. If the warning returns or you cannot check that conditions are safe, contact the service team.
Use external leak location to record where the water is. E11 corresponds to an excessive water level and overflow, while E7 indicates a drainage issue: do not assign these codes the same meaning as E9/E9.1.
Drying the floor helps you see whether the leak recurs; it does not confirm that the leak has been repaired.
View all articles in ASKO washing machine error codes and warnings
