EH0/EHO on AEG washing machines indicates an electrical supply problem. EH1 refers to frequency, EH2 to high voltage and EH3 to low voltage in the documented error code family.
Keep the subcode
The manufacturer's documentation distinguishes these alerts. The code reports a detected condition; by itself, it does not provide a measurement or confirm that the control board is damaged.
Check from the outside that the connection is direct and compatible with the appliance's installation. Do not use extension leads or adaptors to try to bypass the error. Note whether it occurred at the same time as a power outage, fluctuations affecting other appliances or electrical work.
A reset under safe conditions
Support advice is to disconnect the appliance and wait 30 to 60 seconds before reconnecting it and selecting a programme, provided the power point is dry and accessible and there are no signs of damage. If there is a burning smell, a hot plug, sparks or circuit protection devices that trip, do not try this: arrange an electrical inspection.
If other appliances are also affected, consult an electrician; if the power supply has been checked and EH0 persists, contact the washing machine service team. Electrical connections and protection devices explains what the installation needs to have checked. Do not open power points or measure the appliance while it is energised.
A lamp lighting up when plugged into the same power point does not, by itself, certify that the supply is suitable for the washing machine.
View all articles in AEG washing machine error codes and warnings
