EH0/EHO on AEG indicates an electrical supply problem. EH1 refers to frequency, EH2 to high voltage and EH3 to low voltage in the documented family.
Keep the subcode
The manufacturer's documentation distinguishes between these warnings. The code indicates a detected condition; on its own, it does not provide a measurement or confirm that the control board is damaged.
From the outside, check that the connection is direct and compatible with the appliance's installation. Do not use extension leads or adapters to try to get around the error. Note whether it coincided with a power cut, fluctuations affecting other appliances or electrical work.
A restart under safe conditions
Support advises disconnecting the appliance and waiting 30 to 60 seconds before reconnecting it and selecting a programme, provided the socket is dry and accessible and there are no signs of damage. If there is a burning smell, the plug is hot, there are sparks or a circuit breaker trips, do not try this: arrange an electrical inspection.
If other appliances are also failing, consult an electrician; if the electrical supply has been checked and EH0 persists, contact the washing machine service team. Electrical connection and protective devices explains what the installation needs to have checked. Do not open sockets or take measurements while the appliance is live.
A lamp lighting up when plugged into the same socket does not, by itself, certify that the supply is suitable for the washing machine.
View all articles in AEG washing machine error codes and warnings
