EH0/EHO on AEG indicates a power supply problem. EH1 refers to frequency, EH2 to high voltage, and EH3 to low voltage in the documented error code family.
Keep the subcode
The manufacturer’s documentation distinguishes these alerts. The code indicates a detected condition; on its own, it does not provide a measurement or confirm that the control board is damaged.
From the outside, check that the connection is direct and compatible with the appliance’s installation. Don’t use extension cords or adapters to try to bypass the error. Note whether it occurred during a power outage, fluctuations affecting other appliances, or electrical work.
A reset under safe conditions
Support guidance allows you to disconnect the appliance and wait 30 to 60 seconds before reconnecting it and selecting a programme, provided the outlet is dry and accessible and there are no signs of damage. If you notice a burning smell, a hot plug, sparks, or tripped breakers, don’t try this: request an electrical inspection.
If other appliances are also malfunctioning, consult an electrician; if the power supply has been checked and EH0 persists, contact the washing machine service provider. Electrical connections and protective devices explains what the installation should be checked for. Don’t open outlets or take measurements while the appliance is energized.
A lamp working in the same outlet does not, by itself, confirm that the power supply is suitable for the washing machine.
View all articles in AEG washing machine error codes and warnings
