Water flow: inlet, dispensing, recirculation and drainage

In many automatic machines, water enters under mains pressure and a pump drains it away. The valve controls the water inlet; the drain pump has a different function.

Inlet and outlet diagram

  1. The tap and hose carry water into the machine.
  2. The inlet mesh traps particles of the size it is designed to filter.
  3. The solenoid valve opens the water supply when it receives the appropriate command.
  4. Water may pass through the dispenser or take another documented route to the tub.
  5. After use, the pipes carry the wash water to the outlet, using a pump if the design includes one.
  6. The hose discharges into the site's waste connection.

This diagram describes functions, not dismantling positions. A distributor may select different compartments or nozzles depending on the stage.

Variations that change the flow path

With a dual inlet, the control may combine cold and hot water. In recirculation, a branch returns some of the wash water to the load. In a gravity-fed semi-automatic machine, opening the outlet mechanism allows water to drain to a point positioned as specified in its manual; do not infer heights from a pumped system.

The level sensor reports a hydraulic condition to the control; it is not the part that lets water in. A flow meter, where fitted, measures water flow and has a different function.

From the diagram to the actual connections

The inlet connections withstand mains supply conditions. The outlet installation must allow water to drain without backflow or siphoning. Their requirements are not interchangeable, even though both use hoses.

Identify the water supply, inlet, tub and drain before determining which circuit a connection or component belongs to.

View all articles in How a washing machine works: systems and components