Heat may come from an internal heating element, an external hot water supply, or both. Some washing machines use the water at the temperature supplied and do not have a heater.
How energy reaches the wash water
An internal heating element converts electrical energy into heat within the intended circuit. With a hot water supply, some of the energy has already been used before the water reaches the machine. Models with a dual inlet can mix supplies according to their valves and the programme.
The cold and hot water connection must match the machine’s design. Connecting hot water to an unauthorised inlet can affect washing conditions and components; it is not a universally effective way to save electricity.
What the temperature sensor does
The sensor reports the temperature at its measuring point. The control system decides when to heat or mix water, subject to conditions such as water level, cycle phase and safety limits. A thermostat or limiter may serve another function, but not all machines use the same components.
The selected temperature does not necessarily describe the entire temperature profile: it may be a reference, a maximum, or part of the programme profile. Heating and rinsing may take place under different conditions. Touching the glass at the end does not tell you what happened during the wash.
How to interpret energy use and behaviour
When calculating energy per cycle, separate the machine’s electricity use from the energy used to supply external hot water. The steam function is not the same as keeping all the wash water hot.
If the temperature seems incorrect, start by identifying the system and programme. Checking a heating element requires a different level of diagnosis and documentation.
To interpret a temperature, identify its source, the measuring point and the phase it relates to.
View all articles in How a washing machine works: systems and components
