Water flow: inlet, dispensing, recirculation and drainage

In many automatic washing machines, supply pressure brings water in and a pump drains it out. The valve controls the water intake; the drain pump serves a different purpose.

Inlet and outlet layout

  1. The tap and hose carry water to the machine.
  2. The inlet mesh traps particles of the size it is designed to filter.
  3. The solenoid valve opens the water passage when it receives the specified signal.
  4. Water may pass through the dispenser or follow another documented route to the tub.
  5. After use, the pipes carry the wash water towards the outlet, with a pump if the design includes one.
  6. The hose discharges into the site's drainage connection.

This layout describes functions, not disassembly positions. A distributor may select different compartments or nozzles depending on the cycle stage.

Variants that change the route

With a dual inlet, the controls can combine cold and hot water. In recirculation, one branch returns some of the wash water to the load. In a gravity-drain semi-automatic machine, opening the outlet mechanism allows water to drain to a point as specified in its manual; do not infer height requirements from a pump-based system.

The level sensor reports a hydraulic condition to the controls; it is not the part that lets water in. A flow meter, where fitted, measures water flow and serves a different purpose.

From the layout to the actual connections

The inlet connections withstand supply conditions. The outlet installation must allow drainage without backflow or siphoning. Their requirements are not interchangeable, even though both use hoses.

Identify the supply, inlet, tub and drain before determining which circuit a connection or component belongs to.

View all articles in How a washing machine works: systems and components