A visible jet may come from the water supply or from water already in the tub. Recirculation and premixing serve different purposes and can coexist in the same appliance.
Overview of the water paths
| System | Conceptual path | Function |
|---|---|---|
| Recirculation | Tub, pump, pipe and return to the load | Redistribute some of the wash water |
| Inlet spray | Water supply, valve and outlet towards the laundry | Introduce fresh water in a particular area or phase |
| Premixing | Water and product pass through a preparation area | Distribute the mixture before it reaches the laundry |
Some premixing systems incorporate air; its presence should be confirmed in the technical description. Visible foam does not measure how much soil has been removed and is no proof of a consistent benefit.
What a jet does not prove
If it does not appear during a particular phase, this does not mean there is a fault: it may be disabled by the programme, water level or sequence. Nor does it mean the appliance has no filling system. To identify it, consult the documented water circuit and distinguish between inlet, recirculation and drainage.
Automatic dosing determines how much product its mechanism dispenses. Premixing describes what happens next or which circuit is used to prepare it; the terms are not interchangeable.
Results and maintenance
Claims of more even distribution or reduced cycle times need to be assessed against the test conditions for the specific function. Pipes and nozzles may require specific maintenance; do not dismantle them based on experience with another brand.
If a recirculation function that should be operating is persistently absent, the guide to the recirculation pump and circuit helps distinguish between settings, a blockage and a fault.
Identify where the water comes from and where it goes before interpreting the function of a jet or attributing a washing result to it.
View all articles in Washing technologies: motors, sensors and automation
