Water flow: inlet, dispensing, recirculation and drainage

In many automatic washers, supply pressure brings water in and a pump drains it out. The valve controls the water intake; the drain pump serves a different purpose.

Inlet and outlet diagram

  1. The tap and hose carry water to the appliance.
  2. The inlet mesh traps particles of the size it is designed to catch.
  3. The solenoid valve opens the waterway when it receives the appropriate signal.
  4. Water may pass through the dispenser or follow another documented route to the tub.
  5. After use, the pipes carry the wash water to the outlet, with a pump if the design includes one.
  6. The hose drains into the site's drain connection.

This diagram describes functions, not disassembly positions. A distributor may select different compartments or nozzles depending on the cycle phase.

Variations that change the flow path

With a dual inlet, the control can mix cold and hot water. In recirculation, a branch returns some of the wash water to the load. In a gravity-drain semi-automatic washer, opening the outlet mechanism lets the water drain to a point positioned as specified in its manual; do not infer heights from a system with a pump.

The level sensor reports a hydraulic condition to the control; it is not the part that brings water in. A flow meter, when present, measures water flow and serves a different purpose.

From the diagram to the actual connections

The inlet connections are subject to supply conditions. The drain installation must allow water to drain without backflow or siphoning. Their requirements are not interchangeable, even though both use hoses.

Locate the water supply, inlet, tub and drain before determining which circuit a connection or component belongs to.

View all articles in How a washing machine works: systems and components