The suspension supports the tub assembly and limits how its movements are transmitted to the casing. Electronic load redistribution attempts to improve the distribution of the load; these are different mechanisms.
What each component does
| Component | Role |
|---|---|
| Springs or rods | Support the assembly and allow the intended movement |
| Dampers | Dissipate some of the energy of movement |
| Counterweights | Provide the mass and distribution specified by the design |
| Balancing rings | Contribute to dynamic behaviour in designs that include them |
| Spin control | Redistribute the load, limit the speed or cancel an attempt if the control logic requires it |
From imbalance to movement of the casing
A load concentrated in one area generates varying forces during spinning. Some of the movement is absorbed within the suspended assembly, and some reaches the support. Spin speeds and the floor’s response affect what you feel.
The floor must be suitable and the feet must be properly seated. A flexible floor can move even if the casing is initially level. Adding weight or a soft base changes how it behaves without demonstrating that it improves matters.
Intended movement and damage are separate questions
The inner drum and the suspended tub are not the same component. Movement of the assembly does not automatically mean that the shaft has play. If its behaviour has changed or knocking noises occur, an inspection of the suspension should check the relevant fixings and components.
Stability comes from the assembly, its control and its support; none of these should be assessed as if it acted alone.
View all articles in How a washing machine works: systems and components
